AlcoSense ELITE Manuel d'instruction - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AlcoSense ELITE. AlcoSense ELITE 20 pages.
Imprimer la page
- 1. Table of Contents
- 2. Introduction
- 3. Getting Started
- 4. Turning On/Off
- 5. Setting Time
- 6. Changing Units of Measurement
- 7. Activating the Sensor
- 8. Automatic Sensor Clean (ASC)
- 9. How to Establish if an ASC Is Needed
- 10. Quick Sensor Clean
- 11. Performing a Blow Test
- 12. Understanding the Results
- 13. Maintaining Your Alcosense
- 14. Accessories
- 15. Servicing
- 16. Legal
On top of the unit there is a small sticker showing the alert level. Check this then
refer to the screen shots and columns below for your device.
PLEASE NOTE: The below example table is in ‰BAC, not mg/l.
0.5‰BAC Alert Level Model
Description
LO
Less than 0.2‰BAC
(Screen Backlight is AMBER)
Between 0.2‰BAC and
0.29‰BAC
(Screen Backlight is AMBER)
Between 0.3‰BAC and
0.49‰BAC
(Screen Backlight is
alternating RED and AMBER)
Between 0.5‰BAC and
1.5‰BAC
(Screen backlight is RED)
Above 1.5‰BAC
(Screen Backlight is RED)
Error in Reading
14
Example of Screen
0.8‰BAC Alert Level
Description
LO
Less than 0.2‰BAC
(Screen Backlight is AMBER)
Between 0.2‰BAC and
0.59‰BAC
(Screen Backlight is AMBER)
Between 0.6‰BAC and
0.79‰BAC
(Screen Backlight is
alternating RED and AMBER)
Between 0.8‰BAC and
1.5‰BAC
(Screen backlight is RED)
Above 1.5‰BAC
(Screen Backlight is RED)
Error in Reading