AlcoSense Ultra Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AlcoSense Ultra. AlcoSense Ultra 15 pages.

Installing the Batteries

Keep the AlcoSense Breathalyser in the closed position and turn the

machine round so the back is facing you. Following the diagram below

remove the battery compartment cover. Insert the three 1.5v AAA

batteries supplied into the slots provided in the battery compartment

making sure that the batteries are inserted the right way round as

indicated in the battery compartment. Put the battery compartment cover

back on again following the diagram below but in reverse.

IMPORTANT: When replacing the batteries do not mix old and new

batteries. For best accuracy only use a matching set of new good quality

branded batteries.

First Time Setup

1. Press and hold the power button in the middle down until the screen

lights up or slide the unit open.

2. IMPORTANT: You must set the date correctly to today's date when

it asks you. This will be used to calculate when the unit will alert you

to recalibrate it. This date cannot be changed once set. Use the up and

down buttons to change the numbers, and press the middle button to

move to the next item.

3. Choose the country/region you will be using it in, this will automatically

set the correct drink drive limit, blood:breath ratio, unit of measure and

other variables. You can change countries at any time again in the

future through the Main Menu > Settings > Country menu.

4. You should now check for any software updates.

Go to the Main Menu > Info and check the "Version" number. Go to

www.alcosense.com/support and check if a later version number

of software is available for the AlcoSense Ultra. If so, follow the

instructions on the web page to update your unit. We recommend

checking back regularly to get the latest software and keep your unit

up to date.

Turning Off

The unit will enter a power saving mode and dull the screen brightness

after 1 minute of inactivity, and turn itself off after a further 2 minutes

of inactivity.

If you wish to turn the unit off manually, press and hold the middle key

with the power logo on for 3 seconds from any screen.