AerAtron AE2+ Series Manuel d'utilisation et d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} AerAtron AE2+ Series. AerAtron AE2+ Series 18 pages.
Imprimer la page
Important information
!
1. Please read these instructions carefully, be mindful of all warnings and safety information
shown throughout this manual. Should you have any questions please call your local agent.
2. Please review the accompanying assembly diagrams before attempting installation.
3. This fan MUST be installed by a licensed & qualified electrician according to local authority
regulations and in accordance with current wiring rules of the country/state.
4. A copy of the purchasing receipt and proof of installation by a licensed and qualified electrician
according to local authority regulations is required for all warranty claims.
5. Where special access equipment is required to service the fan in accordance with local
authority regulations all associated costs are the responsibility of the owner.
6. Should a warranty claim be required, we reserve the right to charge a service fee for all call
outs where the fan is found not to be defective and / or where access is not provided.
7. To enable future programming, maintenance, cleaning and troubleshooting an isolation switch
per fan is highly recommended. Without an isolation switch per fan, an electrician maybe
required to assist with programming, maintenance, cleaning and troubleshooting. All
associated costs are the responsibility of the owner.
8. A Maximum of 8 fans on each RCD / circuit is recommended. The fans are a Class 5 Device
with leakage to Earth.
9. Your warranty will be void if a solid state dimmer or any other brand of wall controller is used.
10. The means for mains power disconnection must be incorporated in the fixed wiring in
accordance with national wiring rules.
11. To avoid possible electric shock during installation, be sure electricity is turned off at the main
power box before commencing work. Disconnect power by removing fuse or turning off circuit
breaker before installing the fan. Ensure all spliced connections are adequately insulated.
12. Warning! Do not allow the rotating fan blades to come into contact with any object, this can
cause serious injury or death.
13. Damage caused by incorrect installation, Force-majeure, lightning, electrical surges & spikes,
exposure to water, pests or moisture is not covered under warranty.
14.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Australia, New Zealand: In accordance with AS/NZS60355-1 & ASNZS60355-2-80: "This
appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the appliance."
- Please read before attempting installation
This fan must be installed by a licensed and qualified
electrician according to local authority regulations.
1