AlcoSense Elite 3 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AlcoSense Elite 3. AlcoSense Elite 3 10 pages. Fuel cell breathalyzer
Imprimer la page
How to Change Batteries
Step 1: Slide the battery cover up to unlock it.
Step 2: Push the battery cover sideways to remove it.
Step 3: Change the batteries and replace the battery cover.
Warning Display
Flo
bAt
CAL
OL
The AlcoSense
breath alcohol levels. Depending upon the amount of
alcohol registered by the sensor after a period of time, it
will require recalibration.
Andatech recommends the AlcoSense
every 6 months or after 500 uses, whichever comes first.
To maintain it to Australian Standards, calibration every 1
month is required.
The breath sample was not strong enough for
measurement. Please power on the unit again
and make sure the breath is strong and
steady during sampling.
The battery power is low. Please replace the
batteries.
If you have tested over 1000 times, CAL will
show up on the display screen for 3 seconds
before warming up for a test. Please send the
breathalyser back for calibration.
Readings over 0.200%BAC will be displayed
as 'OL'.
®
Elite 3 uses a fuel cell sensor to measure
®
Elite 3 is calibrated