XBOX Steel Knight ZPPU000 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} XBOX Steel Knight ZPPU000. XBOX Steel Knight ZPPU000 24 pages. Wireless controller

Imprimer la page

E N

Connect with Xbox Series X|S / Xbox One

Turn on the power to start Xbox Series X/S console.

①

②

Press the Wake-up Key on the controller (Brook Chameleon Key) to start the product.

③

First press the Connection Key ")))" on the console, and the indicator on the console

will ﬂash rapidly. And then press the ")))" on the front end of the controller.

The indicator (Xbox LED) on the controller will ﬂash rapidly while searching for

signals, and it is solid on while pairing is done.

※

The controller has the feature of "Pairing Memory" while paired upon wireless

connection. Once the controller was connected with the console before, it would be

connected again if users press the Wake-up Key (Brook Chameleon Key); the console

can remember the most 5-7 controller successively. If the connection fails, please

repeat the steps above for reconnection and re-pairing.

※

Connecting the controller with Type-C cable can serve as the wired controller on the

consoles of XBOX Series X|S or XBOX ONE and PC.

※

When used on PC, it's required to use with the original wireless adapter, or use USB-C

cable to connect the controller and the PC.

Connect with Xbox Series X|S / Xbox One

XSX|S

Xbox One

Features and Functions

Customized for Macro Records

Each back key, M1/2/3/4, can record and store 32 gaming actions within 30 seconds

(up, down, left, right, A, B, X, Y, LB, RB, LT, RT, R3, L3, left joystick and right joystick).

Meanwhile, it supports multiple keys to be operated at the same time.

▪

Press and hold Program Key, and then press the customized key (M1 to M4) you

want to set. Then release the key, the LED indicator on the top will be on, and

Macro recording mode is entered.

Start to set

Press

▪

Take setting M1 as the customized key as an example. After pressing M1, users can

start to record the customized gaming actions (within 32 actions) in 30 seconds.

And then press M1 again to complete the setting and LED indicator will be oﬀ.

※

When you only set 1 recording for the Macro (M1-M4), it will be outputted in the way of Remap.

Cancel Macro Setting

Take cancelling M1 as the customized key as an example. Press and hold Program

Key, and then press M1. Then the LED indicator is on, press M1 again to cancel the

customized key.

Temporarily Close or Fully Cancel (M1-M4) Macro Keys at a Time

▪

To fully clear the Macro at a time: Press and hold Program

and Menu Keys at the same time for 3 seconds to fully

clear the Macro settings.

▪

Temporarily close and start the Macro: Press and hold

Program Key and short press Menu Key once to close the

Macro setting temporarily.

※

Press and hold Program Key, and press Menu Key twice to open

the Macro again.

E N

Setting completed

Record

the key

Release

Features and Functions