Xerox 6180DN - Phaser Color Laser Printer Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 28 pages. 26-ppm monochrome/ 20-ppm color
Également pour Xerox 6180DN - Phaser Color Laser Printer : Manuel d'installation (34 pages), Fiche technique (2 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation (2 pages), Manuel de sécurité (38 pages), Note de mise à jour (2 pages), Manuel d'installation (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel (34 pages), Manuel de démarrage (34 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation et d'utilisation (8 pages), Spécifications (4 pages), Manuel (28 pages)

Installation and setup

Setting up media

2-4

•

Slip sheets

•

Stock attributes (Name, Size, Color, Type, Weight)

•

Modulus

•

Output Location

•

Layout (use 1 Up only)

•

Rotation

In DocuSP, you must define the stock using the Printer Manager,

assign each stock definition to a specific physical printer tray, and

load the stock in the trays.

The stock definitions are communicated to the DocuSP IPS Manager

for mapping to the IPDS trays through the Tray/Bin Mappings tab. The

IBM host believes that it is dealing with a printer that may have up to

eight input trays. These input trays may be considered virtual trays for

DocuSP IPDS. In the Tray/Bin Mappings tab you use stock names to

map the stock used for each actual physical tray to the stock name

used for each virtual tray used by the host.

Note that stock names are used to simplify selection in the Tray/Bin

Mappings dialog but that the DocuSP selects stock at print time based

on the stock properties.

Refer to the DocuSP on-line help for more information on using the

Tray/Bin Mappings tab.

Xerox DocuSP IPDS User Guide