16.
Click Open. The Wizard returns you to the previous dialog. Verify that the path and filename are
correct and click OK.
17.
At the next dialog, enter a name for the printer and select whether you want that printer to be the
default. Click Next>.
18.
If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the share
checkbox, and then click Next>.
19.
At the next dialog, it is recommended that you print a test print. Click Finish.
20.
Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.
21.
Send a print job to the printer.
22.
Check the print job for print-quality. If print-quality problems exist or if your job did not print,
refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct the
problem or access PhaserSMART from the Troubleshooting tab of your Windows driver.
Quick install steps (AppleTalk protocol)
Note
Services for Macintosh must be installed for AppleTalk to be available on an NT 4.x server.
1.
At the Desktop, right-mouse-click the Network Neighborhood icon and select Properties.
2.
Click the Protocol s tab and verify that the AppleTalk protocol has been loaded.
3.
If the AppleTalk software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
4.
Open the Control Panel and double-click the Printers icon.
5.
Double-click Add Printer; the Add Printer Wizard starts.
6.
Verify that My Computer is selected and click Next>.
7.
Click Add Port.
8.
Select the AppleTalk Printing Devices and click New Port.
9.
Click Ethernet and select the device.
10.
Choose your printer device from the list, then click OK.
11.
Click OK. The Wizard returns you to the previous dialog. Verify that the port name you entered is
in the list and is correct. The check box to the left of the port name must be checked; if it is not,
check it, and then select Next>.
12.
Insert your printer's Printer Installer and Utilities CD-ROM into your computer's CD-ROM
drive and click Have Disk.
13.
Click the Browse button and select the directory containing the Windows NT drivers:
<CD Drive>:\instal\winnt40, and then click Open.
14.
Select the *.INF file, then click OK.
15.
The Wizard returns you to the previous dialog. Verify that the path and file name are correct and
click OK.
16.
At the next dialog, enter a name for the printer and select whether you want that printer to be the
default, and then click Next>.
Phaser® 6200 Color Laser Printer
Windows NT 4.x Network
19
Imprimer la page