Xerox 8200N - Phaser Color Solid Ink Printer Manuel de configuration du réseau - Page 39

Parcourez en ligne ou téléchargez le pdf Manuel de configuration du réseau pour {nom_de_la_catégorie} Xerox 8200N - Phaser Color Solid Ink Printer. Xerox 8200N - Phaser Color Solid Ink Printer 47 pages. Phaser color printer
Également pour Xerox 8200N - Phaser Color Solid Ink Printer : Spécifications (4 pages)

Imprimer la page

Novell NetWare Distributed/Enterprise Print Services (NDPS/

NEPS)

In order to access Xerox printers in this environment, you need Xerox Gateway software installed on

your system. The latest version of the Xerox Gateway Software is available on the Xerox web site at

www.xerox.com/officeprinting/support. Instructions are available on the web site for installing your

printer using NDPS. The web also contains the CentreWare for NDPS User Guide.

Novell NetWare troubleshooting

Troubleshooting for the Windows-based PC consists of both hardware and software procedures. The

steps in each of these procedures should eliminate cabling, communication, and connection problems

associated with direct-connected ports. Complete one of these procedures (based on the type of port

being used), then run a test print from your software application. If the job prints, no further system

troubleshooting is necessary. If print-quality problems exist or if your job did not print, see the Phaser

8200 Color Printer User Guide to correct the problem.

Requirements

You are operating a Windows-based system with the CentreWare DP software and at least one

print driver installed.

You are a NetWare Network Administrator OR administrative person with ADMIN/

SUPERVISOR or ADMIN/SUPERVISOR EQUIVALENT login rights to the NetWare Server(s)

servicing the Phaser printer.

The instructions for these troubleshooting tasks assume a base knowledge of NetWare.

Novell NetWare troubleshooting quick check

Verify that the printer is plugged in, turned on, and connected to an active network.

Verify that the printer is receiving network traffic by monitoring the LEDs on the back of the

printer. When the printer is connected to a functioning network receiving traffic, its link LED is

green, and its orange traffic LED is flashing rapidly.

Verify that the client is logged into the network and printing to the correct print queue. Also verify

that the user has access to the Phaser printer queue.

Verify that the Phaser printer NetWare print queue exists, is accepting jobs, and has a Print Server

attached. If not, try using Setup Wizard in CentreWare DP to reconfigure the print queue.

Print out the Configuration Pages. Verify that Printer Server is enabled. Try setting the frame type

to the frame type your NetWare Server is using.

Note

To determine your NetWare IPX frame type, type config at the Novell console screen. On

networks using multiple IPX frame types, it is CRITICAL that the frame type be set

correctly.

Phaser® 8200 Color Printer

Novell NetWare 3.x/4.x/5.x Network