Xerox DOCUCOLOR 12 Manuel d'initiation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'initiation pour {nom_de_la_catégorie} Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 24 pages. Carrier
Également pour Xerox DOCUCOLOR 12 : Spécifications (2 pages), Manuel de référence (10 pages), Manuel de démarrage rapide (5 pages), Manuel de démarrage rapide (8 pages), Utilisation du manuel (12 pages), Manuel complémentaire (4 pages), Manuel complémentaire (18 pages)

Clearing jams behind the front door

Demonstrate opening the front door on the printer.

See Figure 18.

Be careful. The fuser is hot and you may

get burned.

Point out the access areas inside the printer used for

jam clearance. See Figure 19.

1. Rotate the green latch handle clockwise and pull

out the paper path module until it is fully open.

2. Lift the baffle (marked 1) and remove jammed

paper. Press the baffle gently back into place.

3. Remove any paper from the entry to the fuser.

4. Push the green handle (marked 2) to the right

and remove any paper from the exit area of the

fuser. Gently secure the handle back into place.

5. Lower the green handle (marked 3) and remove

any paper from the aligner baffle.

6. Lower the green handle (marked 4) and remove

any paper from the duplex in baffle. Gently

secure the handle back into place.

7. Push the paper path module firmly into the

printer and rotate the green latch handle coun-

terclockwise to latch it.

Getting to Know Your Product

Product Orientation Guide

Figure 18

Figure 19