Xerox Phaser 4 400 Manuel papier - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel papier pour {nom_de_la_catégorie} Xerox Phaser 4 400. Xerox Phaser 4 400 42 pages. Laser printer
Également pour Xerox Phaser 4 400 : Fiche technique (2 pages), Spécifications (3 pages), Manuel de soutien (27 pages), Manuel de configuration (24 pages), Manuel d'entretien (20 pages), Manuel de dépannage (48 pages), Manuel de l'évaluateur (16 pages), Manuel d'entretien (13 pages), Manuel de configuration et de référence rapide (41 pages), Manuel d'entretien (15 pages), Manuel d'entretien (9 pages), Instructions pour l'installation du pilote (6 pages), Manuel d'entretien (9 pages), Manuel (22 pages)

Imprimer la page
Xerox Phaser 4 400 Manuel papier

Loading custom size paper

In addition to the wide variety of paper sizes available for this printer, you can use custom size paper.
For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,
refer to the Supported Papers section of the Trays and Paper Guide on the Interactive Documentation
CD-ROM or print the Paper Tips Page from the front panel of your printer.
Note
After you load a custom size paper in any of this printer's trays, you MUST set the front
panel values to agree with the paper you have loaded. You also must define the custom size
in the printer driver.
This section provides information about loading custom size paper in Trays 1, 2, or 3. You also can load
custom sized paper in the Multi-Purpose Tray and in the Envelope Feeder.

Loading custom size paper in Trays 1, 2, or 3

1.
Open the tray.
2.
Insert the custom size paper and adjust the guides to match the size of the paper.
Top view of tray:
A. Simplex printing, B. Duplex printing
3.
When the front panel prompts you to confirm the type of paper, scroll to the correct paper type and
press the OK key to save your selection.
4.
Set the tray for custom size paper and specify the dimensions:
a.
On the front panel, with
b.
Scroll to
Printer Setup Menu
c.
Scroll to
Tray Setup Menu
d.
Scroll to
Tray # Setup Menu
e.
If you don't see a selection for
OK key to change
f.
Scroll to
Set Custom X
Phaser™ 4400 Laser Printer
B
A
highlighted, press the OK key.
Menus
by pressing the Down Arrow key and press the OK key.
and press the OK key.
(where # is the number of the tray) and press the OK key.
Set Custom X
to
.
Custom Size
On
and press the OK key.
P4400-17
, scroll to
Custom Size
Trays
and press the
13