Clarity C4220+ Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Clarity C4220+. Clarity C4220+ 18 pages. Extra loud cordless speakerphone with caller id
Également pour Clarity C4220+ : Manuel de démarrage rapide (2 pages)
Imprimer la page
TROUBLESHOOTING
C4220+
Phone will not hold charge:
•
Make sure the charging contacts on the handset and base are free
of dust and dirt. While unplugged, clean the contacts with a soft
cloth.
•
Make sure IN USE / CHARGE light on the base is lit when the
handset is in the cradle.
•
If necessary, replace the handset battery.
Difficulty in placing or receiving calls:
•
Move closer to the base and try again.
•
Make sure you have selected the correct dialing mode, tone or
pulse.
•
Make sure the AC adapter is not plugged into a wall outlet with
other appliances. Disconnect for 5-10 seconds then reconnect.
Place the handset back on the base and reinsert the AC adapter.
•
Make sure the handset battery is fully charged.
Your handset screen is displaying "Searching...":
•
Verify that the AC adapter is plugged into the base and into the wall
outlet.
•
The handset is out of range or the power to the base is unplugged.
•
Move closer to the base.
•
Place the handset into the base until the screen returns to standby
mode. It will take approximately 5-10 seconds for the
handset to register to the base.
•
Handset may need to be re-registered to the base manually.
Follow instructions on page 28.
30
TROUBLESHOOTING
C4220+
Screen displays "Battery Low":
•
Handset batteries are low on charge; return the handset to the
base to rechargw the batteries.
TALK button is blinking green (fast pace):
•
The base is trying to locate the handset; press TALK to end
the FIND paging process and return the handset to the base.
Base POWER light blinks green once every second:
•
The power adapter may not be plugged in. Verify AC adapter is
plugged into proper wall outlet.
Base POWER light blinks green every five seconds:
•
The power adapter may not be plugged in. Verify AC adapter is
plugged into proper wall outlet.
•
The base batteries may be "low" (their charge). If necessary,
replace batteries.
E
N
G
L
I
S
H
31