Xerox Phaser 6100DN Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox Phaser 6100DN. Xerox Phaser 6100DN 32 pages. Disk overwrite installation and usage
Également pour Xerox Phaser 6100DN : Manuel d'installation (34 pages), Spécifications (2 pages), Manuel de l'utilisateur (32 pages), Brochure & Specs (4 pages), Manuel de l'utilisateur (28 pages), Manuel d'installation (2 pages), Manuel de sécurité (38 pages), Manuel d'installation (2 pages), Note de mise à jour (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel (34 pages), Manuel de démarrage (34 pages), Manuel d'installation et d'utilisation (8 pages)

Image quality for PCL

MICR User Guide

The MICR fonts provided with the MX printers have been

optimized for MICR printing on these systems. Therefore, it is

important that darkening of the bitmap font is disabled when

printing PCL MICR documents. To ensure that bitmap font

darkening is disabled, follow these steps:

1. Log on as Administrator.

2. Select the Printer pull-down menu and select Image Quality.

3. In the Raster Image Processors list, do one of the following:

•

If you are using the 300 dpi font (for example, E13B-

P.HPP), double-click PCL 300.

•

If you are using the 600 dpi E13B font (for example, E13B-

609.HPP) or the CMC7 font (for example,

CMC72510.HPP), double-click PCL 600.

The PCL Image Quality window opens.

4. In the Thickening Control section, if the Bitmap Fonts check

box is selected, deselect it. Click OK.

5. If changes were made, a Restart confirmation prompt appears.

Click Yes to restart the Xerox FreeFlow® Print Server

software.

To implement the Xerox AFP MICR fonts in your existing IBM

MICR application, perform the steps from the following

appropriate section.

For information on installing the Xerox AFP MICR fonts, refer to

Installing Xerox AFP MICR Fonts, delivered with your MICR

system.

Existing IBM MICR implementation

1. Install the Xerox MICR fonts on the host AFP system.

2. Ensure that all other fonts used for MICR applications have

been converted to 300 dpi and loaded into the 300 dpi font

library.

3. Substitute the Xerox 300 dpi AFP MICR fonts for the line-

named IBM originals.