Xerox Synergix 8855 Manuel complémentaire - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Xerox Synergix 8855. Xerox Synergix 8855 28 pages. Windows nt 4.0 postscript print driver user guide
Également pour Xerox Synergix 8855 : Manuel de l'utilisateur (44 pages), Manuel de l'opérateur (11 pages), Manuel complémentaire (26 pages), Manuel du logiciel (30 pages)
Imprimer la page
Preparing the Host SCSI Port
Ultra SCSI Port (Host)
To use this port your workstation must have a SCSI interface card and
appropriate software installed and operating.
Enable Controller SCSI Port
Use the Printer_Defaults>Ports menu of the Web PMT to set a device
number compatible with your workstation and to disable the termination. By
default, the host SCSI port bus termination is enabled.
Figure 6 – Typical Web PMT, Ports Setup Page
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
Software Supported
•
ServeWare Version 2.42 or later.
•
VGS (in Xerox 150 Emulation Mode)
Data Formats Supported
•
Xerox 150 Emulation
•
Versatec Raw Raster
•
VDS
•
VCGL
SCSI Cable Description
The SCSI cable must not exceed a maximum length of 9.75 feet (3 meters).
15