Xerox WORKCENTRE 7120 Manuel de référence

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 30 pages. Color networking mfp a3
Également pour Xerox WORKCENTRE 7120 : Manuel de l'évaluateur (25 pages), Manuel de l'évaluateur (24 pages), Spécifications (14 pages), Spécifications (14 pages), Comparaison concurrentielle (11 pages), Comparaison concurrentielle (11 pages), Brochure & Specs (4 pages), Manuel de référence (29 pages), Manuel d'utilisation rapide (20 pages), Manuel d'utilisation rapide (20 pages), Manuel d'utilisation rapide (20 pages), Manuel d'utilisation rapide (20 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'utilisation rapide (20 pages), Manuel de référence (32 pages), Manuel de l'administrateur du système (20 pages)

PDL Reference Guide for the

Xerox WorkCentre 7120

Customer Tip

dc10cc0471

Accessing Extended Features

This document describes how to access the extended features of the WorkCentre 7120 and in environments that do not have a

custom driver.

Note: Some of the commands and syntax used in this document requires familiarity with either PostScript (PS) or Printer

Command Language (PCL).

This document provides the Printer Description Language (PDL) commands and syntax for each feature. The following items are

also included:

 PCL tables that describes the PCL features and the syntax to use the feature.

 PostScript tables that describes the PostScript features and the syntax to use the feature.

This document is not intended as a PS or PCL reference manual, but a guide for using the extended features in PS and PCL

commands.

Search the Feature Table to determine whether the feature you wish to use is supported.

Verify that the feature is supported by your device. For example, the WorkCentre must have the Finisher option installed to

use stapling commands.

Following across the tables to find the syntax listed for the PDL examples shown. Read the Dependencies/Caveats section.

PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the device. If there is more than one

method listed to access a specific feature, determine the best method for your application and use that method.

Comment Commands

To process all PJL COMMENT commands and DSC, enclose them with XRXBegin and XRXEnd commands.