Xerox WorkCentre 7300 Series Manuel de dépannage - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Xerox WorkCentre 7300 Series. Xerox WorkCentre 7300 Series 40 pages. Xerox printer guide 7300
Imprimer la page
The
Calibrate Margins Menu
imaging area is shown as a dashed rectangle; the printer will not print outside this rectangle.
Step 1.
Adjust Side 1 Margins. To move the dashed rectangle to the position you want it on the page:
1.
From the printer's front panel
2.
Scroll to
Calibrate Margins Menu
3. To move the dashed rectangle you see on the page printed to the position you want, use the front panel menu
items
Adjust Side 1 "A" Margin
4.
Reprint this page to verify the adjustment.
You can adjust the settings from -40 to +40 units. The thickness of the rectangle's dashed lines is 1 unit. 12 units move
the rectangle 1 mm. The maximum distance the rectangle can be moved (-40 to +40) is 6.7 mm.
Phaser 7700 Color Printer
Calibrate Margins
A-
Decrease
Adjust Side 1 "A"
Margin
setting to move left.
Step 2.
If the printer has the duplex option, adjust Side 2 Margins.
1.
With Side 1 facing you, hold the print up to a strong light. Note the shadow of the solid lines printed on Side 2.
2.
Use the front panel menu items
lines until they align with the Side 1 rectangle. Reprint to verify your adjustment.
Page 1 of 1
PHASER
allows you to adjust the printer's imaging area relative to the edges of the paper. The
Support
Menu, scroll to
and press OK. Select
and
Adjust Side 1 "B" Margin
Phaser 7700 Color Printer
Calibrate Margins
Increase
Adjust Side 1 "A"
Margin
setting to move right.
Adjust Side 2 "A" Margin
Phaser 7300
Cal
®
7300 COLOR PRINTER
Calibrate for Margins (Long-Edge Feed)
Improve Print Quality?
Print Calibrate Margins Page
as illustrated below.
B+
Phaser 7700 Color Printer
Calibrate Margins
A+
Increase
Adjust Side 1 "B"
Margin
setting to move up.
and
Adjust Side 2 "B" Margin
-
A
and press OK.
and press OK to print this page.
Phaser 7700 Color Printer
Decrease
Adjust Side 1 "B"
Margin
setting to move down.
to move the Side 2 solid
Phaser 7300
B
Cal
+
+
A
-
B
Calibrate Margins
B-