Xerox WORKCENTRE C2424 Manuel de l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 43 pages. Copier-printer
Également pour Xerox WORKCENTRE C2424 : Manuel de référence rapide (14 pages), Brochure (8 pages), Manuel complémentaire (7 pages), Spécifications (6 pages), Manuel de démarrage (26 pages), Manuel de l'utilisateur (21 pages), Manuel de l'utilisateur (20 pages), Manuel d'entretien (20 pages), Manuel de l'utilisateur (19 pages), Manuel d'instructions (16 pages), Manuel (12 pages), Manuel d'instructions (6 pages), Manuel d'installation (4 pages), Manuel d'installation (2 pages), Remplacement du kit de rouleaux d'alimentation (2 pages), Manuel de configuration (2 pages), Modèle volontaire d'accessibilité des produits (10 pages), Comparaison concurrentielle (3 pages), Manuel de référence rapide (14 pages), Manuel d'entretien (11 pages), Manuel de référence rapide (13 pages)

Imprimer la page
Xerox WORKCENTRE C2424 Manuel de l'utilisateur
Verifying Settings
1.
Verify the settings in the "Configuration Page."
■
IP Address Source is set to: DHCP, Front Panel, BOOTP, or Auto IP (depending
on your network configuration).
Current IP Address is set correctly. (Note this address if it is assigned by Auto IP,
■
DHCP, or BOOTP.)
■
Subnet Mask is set correctly (if used).
■
Default Gateway is set correctly (if used).
■
LPR is enabled. Verify that the LPR and AppSocket settings are set as desired.
■
Interpreters: Auto, PCL, or PostScript (depending on your driver).
2.
Verify that the client is logged into the network and printing to the correct print queue. The
user should also have access to the Phaser print queue.
Verifying Installation
1.
Right-click the My Network Places icon on the desktop and select Properties.
2.
Click the Protocols tab to verify that the TCP/IP protocol has been installed.
3.
Click Add to install any components not listed, then restart your computer.
4.
Click Start, click Settings, then click Control Panel.
5.
Double-click Services.
6.
Locate TCP/IP Print Server, then verify these column entries:
■
Status column: Started
■
Startup column: Automatic
7.
Click Start, click Settings, then click Printers.
8.
Right-click the printer icon, then select Properties. Verify that you have installed the
correct driver for your system.
9.
Select the Ports tab. Verify that the IP Address in the Print to the Following Port list is
identical to the one on the "Configuration Page." You may need to click the Configure
Port button to view the IP address. If necessary, re-select the TCP/IP number used for
your system.
Printing a Test Page
1.
Click the General tab.
2.
Click Print Test Page. If the system still does not print, do one of the following:
■
Access PhaserSMART Technical Support on the Troubleshooting tab of your device
driver.
■
Go to www.xerox.com/office/support.
WorkCentre® C2424 Copier-Printer
6-23
Windows NT 4.x