Xerox WORKCENTRE C2424 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 43 pages. Copier-printer
Également pour Xerox WORKCENTRE C2424 : Manuel de référence rapide (14 pages), Brochure (8 pages), Manuel complémentaire (7 pages), Spécifications (6 pages), Manuel de démarrage (26 pages), Manuel de l'utilisateur (21 pages), Manuel de l'utilisateur (20 pages), Manuel d'entretien (20 pages), Manuel de l'utilisateur (19 pages), Manuel d'instructions (16 pages), Manuel (12 pages), Manuel d'instructions (6 pages), Manuel d'installation (4 pages), Manuel d'installation (2 pages), Remplacement du kit de rouleaux d'alimentation (2 pages), Manuel de configuration (2 pages), Modèle volontaire d'accessibilité des produits (10 pages), Comparaison concurrentielle (3 pages), Manuel de référence rapide (14 pages), Manuel d'entretien (11 pages), Manuel de référence rapide (13 pages)

Imprimer la page
Xerox WORKCENTRE C2424 Manuel de l'utilisateur
Configuring the Network Address
TCP/IP and IP Addresses
If your computer is on a large network, contact your network administrator for the appropriate
TCP/IP addresses and additional configuration information.
If you are creating your own small Local Area Network or connecting the system directly to
your computer using Ethernet, follow the procedure for automatically setting the system's
Internet Protocol (IP) address.
PCs and systems primarily use TCP/IP protocols to communicate over an Ethernet network.
With TCP/IP protocols, each system and computer must have a unique IP address. It is
important that the addresses are similar, but not the same; only the last digit needs to be
different. For example, your system can have the address 192.168.1.2 while your computer has
the address 192.168.1.3. Another device can have the address 192.168.1.4.
Generally, Macintosh computers use the EtherTalk protocol to talk to a networked system.
Unlike TCP/IP, EtherTalk does not require systems or computers to have IP addresses.
Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically programs an IP address into every PC and system on the network that is
configured to use DHCP. A DHCP server is built into most cable and DSL routers. If you use a
cable or DSL router, see your router's documentation for information on IP addressing.
For more information, go to the table of
this section.
Automatically Setting the System's IP Address
If the system is connected to a small established TCP/IP network without a DHCP server, use
the Installer on the WorkCentre C2424 Software CD-ROM to detect or assign an IP address to
the system. For further instructions, insert the software CD-ROM into your computer's CD-
ROM drive. After the Installer launches, follow the prompts for installation.
Note
For the automatic Installer to function, the system must be connected to an established
TCP/IP network.
Connections and Internet Protocol (TCP/IP)
infoSMART Knowledge Base documents
WorkCentre® C2424 Copier-Printer
6-5
at the end of