Xerox WorkCentre M118i Manuel du logiciel - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel du logiciel pour {nom_de_la_catégorie} Xerox WorkCentre M118i. Xerox WorkCentre M118i 47 pages. Copy/print/fax/email
Également pour Xerox WorkCentre M118i : Manuel de l'utilisateur (2 pages), Manuel du module (2 pages), Carte d'installation rapide (2 pages), Manuel d'installation rapide (5 pages), Manuel d'installation rapide (5 pages), Manuel (28 pages), Manuel d'installation du support (4 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (1 pages), Manuel d'installation (1 pages), Manuel de démarrage (25 pages), Manuel de l'évaluateur (12 pages), Manuel d'entretien (12 pages)

Xerox WorkCentre M118i Manuel du logiciel

Installation Procedure (Mac OS X)

Install the PostScript Printer Description (PPD) file for the Mac OS X into the Mac OS
X v10.2.x Macintosh.
This section describes how to install the PPD file on a Mac OS X v10.2.4, as an
example.
NOTE: The printer driver does not need to be installed on the Mac OS X. It uses the
Adobe PostScript driver that is provided with the Operating System.

Installation Procedure

1.
Insert the PostScript Driver Library CD-ROM in the CD-ROM drive.
The WorkCent-PS icon appears on the desktop.
2.
Double-click [WorkCent-PS].
The WorkCent-PS window opens.
3.
Open the [Mac OS X] folder.
The Mac OS X window opens.
4.
Double-click [PPD Installer].
The installer starts and the Authenticate window opens.
5.
Enter the Administrator's user name and password, then click [OK].
The License screen opens.
6.
Read through the license agreement carefully and if you have no objections to it,
click [Accept].
7.
Confirm the Install Location and change it if necessary, then click [Install].
8.
When the dialog box showing installation has completed appears, click [Quit].
This completes the installation.
Proceed to Adding a Printer (Mac OS X) on page 37 to continue.

Adding a Printer (Mac OS X)

After the PPD file has been installed, set the PPD file for the printer driver, and then
add the printer.
The printer driver controls the printer functions based on the information in the PPD file.
As an example, this section describes how to add a printer on a Mac OS X v10.2.4.

Procedure

1.
Make sure that the machine is on.
2.
Check that the machine's port is set to Enable.
– When using AppleTalk, set the EtherTalk port to Enable.
– When using IP Printing, set the LPD port to Enable.
Xerox WorkCentre 118 Postscript® User Guide
5 Operation on Macintosh Computers
37