Xerox 4595 Document sur les attentes des clients - Page 6

Parcourez en ligne ou téléchargez le pdf Document sur les attentes des clients pour {nom_de_la_catégorie} Xerox 4595. Xerox 4595 33 pages. Copier/ printer with copy-server and controller
Également pour Xerox 4595 : Manuel de l'opérateur (1 pages), Introduction (4 pages), Manuel de référence rapide (6 pages), Manuel de référence rapide (4 pages), Brochure & Specs (4 pages)

Xerox 4595 Document sur les attentes des clients

Options for the FreeFlow DocuSP Print Server

FreeFlow DocuSP Print Server stand
Imposition license
FreeFlow VI Interpreter (VIPP software)
LCDS enablement
IPDS enablement
Online CUP Kit (Channel-to-Universal PCI for online channel connectivity), available in
countries that do not require RoHS compliance. (For example, the U.S. does not require
RoHS compliance.)
Removable Hard Disk Drives (RHDs) – one for the DFE and one for the print engine.
Support for RSA (Rochester Software Associates) software, co-resident on the FreeFlow
DocuSP Print Server. (RSA connectivity solutions can enable ESCON.)
RoHS compliant Online CUP Kit (Channel-to-Universal PCI for online channel connectivity)

Printer System Power Saver Mode

The copier/printer system is installed with a power saver feature that will automatically shut off the
machine power if no print data is received for a specified period. When the printers are in power
saver mode, power to the control panel and fuser unit is reduced to save energy. The display will
turn off but the Power Saver button on the control panel will be lit indicating the machine is in
Power Saver mode.
The Power Saver feature includes two modes:
Low Power mode: Power consumption is reduced to approximately 120 watts. It will take
about 45 seconds to warm up the printers when exiting Low Power mode.
Sleep mode: Power consumption is reduced approximately 13 watts. It will take about 5
minutes to warm up the printers when exiting Sleep mode.
The intervals for Low Power mode and Sleep mode can be set and specified in 1 minute
increments, from 1 to 240 minutes.

Billing meters and accounting

The product provides accurate billing of all prints through the electronic billing meter within the
printer system. There is no mechanical meter on the printer system. Meters can be accessed and
read from the user interface on the printer.
Depending on the application, some blank pages used for duplex printing will be counted for
metering purposes. Paper run through the post process inserter will not increment the billing
meter.

Foreign Interface Device

In addition to the accounting feature, a Foreign Interface Device (FID) is an option that enables a
third party device to perform external electronic accounting functions. When the FID is installed
by a CSE and enabled on the 4595, device will not function until an account number is entered.
Installation of the FID takes approximately 15 minutes.
NOTE: Print jobs from external controllers, like the Xerox FreeFlow DocuSP Print Server, are not
tracked via accounting applications connected to the Foreign Interface Device.

Removable Hard Drive (optional)

For extra security, the product can be installed with optional removable hard drive(s): one for the
FreeFlow DocuSP Print Server, and one for the print spooler and copier server.
6