ERGOFF K257010 Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ERGOFF K257010. ERGOFF K257010 3 pages.
Imprimer la pageSTEP 2
Install the Lifting Columns
D
x8
F
4x4
1
STEP 3
Install the Feet
C
x8
F
4x4
Choose feet according to needs
Type A: 2X700mm
Type B: 1X700mm，1X900mm
Type C: 2X900mm
STEP 4
Install the tabletop
Supporting beam scale mark
The scale mark on the
supporting beam
matches the dimension
of tabletop.
F
D
2
Insert the lifting columns(1) into the supporting beam. Tighten the screws
with the allen key (F).
F
C
1
Assemble the feet(1) on the bottom of the lifting column(2) .
Use allen key(F) to tighten the screws (C).
2
Loosen
F
4x4
Stretch
Adjust the distance of the
Tighten
supporting beam according
to the actual situation.
Note: When the supporting beam stretches to
over 180cm, follow the installation Method 2 in
STEP 6.
STEP 5
Install the Handset
4
STEP 6
Install the Cable
Management Cover
B
x4
Method 1
F
4x4
3
2
B
First, screw the screw (B) into the supporting beam (2) with the allen key (F),
and do not completely tighten it, snap the cable management cover (3) into the
screw (B) on one side, and buckle the other side into the screw (B), Finally
tighten the screw (B) with the allen key (F).
B
x4
Method 2
D
The installation method of the cable management
x4
cover (3) is the same as that of method 1 in step 6.
F
4x4
Port for
handset
Step 1: Do not tighten screws completely.
,
When the supporting beam stretches to over 180cm,
cable management cover (3) needs to be placed on the
middle connecting rod.
The supporting beam must not
be extended beyond this hole.
Power port
Port for cable
connected to the
lifting column