Xerox CopyCentre C90 Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox CopyCentre C90. Xerox CopyCentre C90 24 pages. Copycentre / workcentre pro auditron report software
Également pour Xerox CopyCentre C90 : Manuel de démarrage rapide (16 pages)
Imprimer la page
Collecting Data via Serial Cable
To collect data locally, you will need: a 9-pin serial throughput cable and a valid User Number.
1. Locate and open the 3-inch by 3-inch cover at the left rear of the Document Glass cover to
expose two connectors – the smaller one is the 9-pin serial connector.
2. Connect a 9-pin serial throughput cable between the serial connector on the machine and the
PC. This cable will have rectangular connectors on both ends.
3. Select Start, then Programs, and Auditron Report Software to open the Connection
Selection window.
4. In the Connection Selection window, select Local.
If this is the first time this program has been used, the Connection Selection window will
display the default assignments for Local Setup and Remote Setup. Check that the Local
Setup assignment is correct for your computer. Refer to Setup Tips at the end of this
document to determine the port used by your computer's spare serial connection.
5. Select OK. The PC window will briefly display the configuration of the CopyCentre
C65/C75/C90 WorkCentre Pro 65/75/90 in the Connection Manager window. Select Close
if the Connection Manager screen has not been set to close automatically. If you want the
screen to automatically close, check the Auto Close box.
If the PC is not connected to the CopyCentre C65/C75/C90 WorkCentre Pro 65/75/90 at this
time, a window will briefly appear with a message to check the connection. The software
will continually attempt to establish communications. If a successful connection has not
been made within five minutes, the software will cease trying and will leave a window with a
request to Core Functionality not detected, please try again.
8