Clarity XLC 3.4 Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Clarity XLC 3.4. Clarity XLC 3.4 20 pages. Extra loud cordless speakerphone with caller id
Également pour Clarity XLC 3.4 : Manuel d'installation rapide (2 pages), Manuel d'installation rapide (2 pages)

Imprimer la page

HANDSET REGISTRATION

XLC3.4

REGISTERING THE XLC3.4

Handset

In order to use the XLC3.4 (or XLC3.1) handset, you must

Needs

Registration

Pull the handset's battery tab located on the bottom of

the device, and then press MENU to start registering or

deregistering your handset from your system.

Hold Base

FIND Key

For 5 Secs

TO REGISTER AN UNREGISTERED HANDSET

1. Press MENU to enter registration mode. You will see

displayed on the screen, "Handset Needs Registration."

Then Press

2. Press and hold the FIND key on the XLC3.4 base for five

MENU Key

seconds, until the base visual ringer starts flashing. Release

FIND key on the XLC3.4 base.

3. Press MENU key on the handset.

4. The screen shows "Registering... ", then "Registration

Registering...

Successful" (accompanied by five quick beeps).

5. Your handset is now registered to your XLC3.4 system.

Your screen will display "Handset X," (where "X" is the

number of the actual handset registered, such as the second

or fourth handset, etc.).

Registration

Successful

You can extend the number of handsets by using additional

XLC3.1 handsets (sold separately).

TO REGISTER YOUR HANDSET AGAIN (or to

Auto Talk

1. In standby mode, press MENU.

Voice Asst

2. Press DOWN arrow five times to advance the row

reading "Phone Setup" to the top of the screen.

3. Press MENU to enter the setup section. The screen

displays "Register" on the screen's top row now.

4. Press MENU to enter the Registration section.

Deregister

5. Press MENU again to select "Register."

6. Follow the Registration steps listed above.

TO DEREGISTER THE HANDSET

Deregister

1. See the six steps listed above, then press MENU to select

"Deregister."

2. Your handset will deregister from your base as

HANDSET 1

soon as you press MENU. The screen will show "Handset

Deregistered

X Deregistered"(again, where "X" is the number of the

handset registered), then "Handset Needs Registration."

TROUBLESHOOTING

XLC3.4

The unit will not operate / no dial tone:

•

Verify the AC adapter is securely plugged into the AC outlet, the

base and the telephone.

•

Verify the telephone line cord is securely plugged into the wall jack

and the telephone.

•

Make sure the handset battery is fully charged.

•

Make sure the battery has been placed in the battery compartment

correctly. (The circular metal contacts on battery need to touch

the metal springs inside battery compartment.)

•

Verify the telephone is in the correct dialing mode: Tone (touch)

or Pulse (rotary).

•

Make sure you are in the usable range of the base station.

The phone does not ring when you receive a call:

•

Make sure the RINGER switch on both handset and base is

set to ON.

•

Verify the AC adapter is securely plugged into the AC outlet,

the base and the telephone.

•

Verify the telephone line cord is securely plugged into the wall

jack and the telephone.

•

Make sure you are within the usable range of the base station.

•

You may have too many extensions on your line. Try unplugging

a few devices.

Noise, interference or other calls heard while using the

handset:

•

Make sure you are within the usable range of the base station.

•

Make sure the handset battery is fully charged.

•

Try relocating the base unit to another location.

•

Make sure the AC adapter is not plugged into the wall outlet

with other appliances.