DIRECT OUTDOOR LIVING GENEVA Manuel d'instructions de montage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} DIRECT OUTDOOR LIVING GENEVA. DIRECT OUTDOOR LIVING GENEVA 6 pages.

Imprimer la page
GENEVA
ASSEMBLY INSTRUCTIONS
BEFORE YOU START ASSEMBLING YOUR
FURNITURE:
CHECK THAT YOU HAVE ALL THE
PIECES LISTED ON THE LEFT HAND
SIDE.
LAY A CLEAN SHEET ON A FLAT
SURFACE BIG ENOUGH TO ASSEMBLE
YOUR FURNITURE ON IN ORDER TO
PROTECT YOUR FURNITURE.
A
1
B
1
C
1
D
4
E
4
F
8
G
1
H
1
GENEVA TABLE ASSEMBLY INSTRUCTIONS . DIRECT OUTDOOR LIVING
(TABLE)
M6*30
2.
Place the table upright, insert the ice bucket (C) into the middle hole and
cover with the ice bucket cover (B). Then place the tempered glass table top
(H) over the table (A).
1.
Attach table feet (D) to the table (A). Align the table feet (B) in the locations
shown in the above image and insert two screws (F) through the feet (B) (do
not insert them into the hole in the corner of the foot) and into the table base
(A). Tighten the screws with the allen key (G). Then screw in part (E) into the
middle hole of (D).
Part (E) allows you to alter the height of each leg on the chair to allow for
uneven ground below the sofa set. You can alter each leg to a different
height to suit the location the table is placed.