Xerox DocuColor 4 CP Manuel complémentaire - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Xerox DocuColor 4 CP. Xerox DocuColor 4 CP 18 pages. Network-ready color laser copier/printer
Imprimer la page
Controller Specifications
MIPS 4700 Processor, 133 MHz CPU
64 MB RAM minimum memory (Expandable to 256 MB)
4.8 GB internal hard drive, standard.
10 BaseT /100 BaseT, 10Base-5 network interface standard
Parallel P1284
Token Ring network card (optional)
Network Specifications
Protocols Supported
TCP/IP
Novell IPX/SPX
SMB
AppleTalk
NetWare c4.1, v3.12, v3.11, v3.1
Token Ring network card (optional)
Automatic protocol switching and concurrent job receiving are supported in the DocuColor 4 CP.
Note: AppleTalk is not supported through Windows NT on the DocuColor 4 CP.
TCP/IP from Windows 95/98 requires a third party software package
Controller Features
Resolution
Print resolution for all paper sizes is 600 dpi x 600 dpi x 8 bits per pixel per color.
Billing Meters
The DocuColor 4 CP controller does not provide any meter counter.
Maximum Image Sizes
Maximum size paper for output: 330 x 457mm; 13 x 18 in
Minimum size paper for output: 80 x 140 mm; 3.5 x 5.5 in
Maximum printable area: 320 x 450mm; 12.6 x 17.7in
The maximum scan area for the DocuColor 4 CP is 297x431.8 mm (A3, 11x17).
There is no minimum scan area limitation.
PIN Authorization
There are two types of PIN authorization that can be enabled on the DocuColor 4 CP scanner:
User Authentication: To permit use of the copier
Administration Authentication: To permit changes to machine controls and settings
The PIN authorization for the printer and scanner are independent.
Terms and product names used in this document may be trademarks or registered
Trademarks of their respective companies and are hereby acknowledged.
Expectation Setting Document for
DocuColor 4 CP
Frame Types Supported
Ethernet_II, Ethernet_SNAP
IEEE802.3, IEEE802.2
Vers. 2.4 dated: 9/29/99 AML, RD
11
page