Xerox DocuColor 8000 Brochure - Page 13

Parcourez en ligne ou téléchargez le pdf Brochure pour {nom_de_la_catégorie} Xerox DocuColor 8000. Xerox DocuColor 8000 14 pages. European harmonic current notice
Également pour Xerox DocuColor 8000 : Manuel d'utilisation (2 pages), Bulletin d'information (2 pages), Bulletin d'information (1 pages), Manuel de planification (22 pages), Procédure de nettoyage (2 pages), Manuel de référence (4 pages), Manuel de démarrage (40 pages), Mode d'emploi (1 pages), Manuel (10 pages), Manuel complémentaire (6 pages), Manuel (13 pages), Avis (1 pages)

Imprimer la page

FreeFlow Print Server

DocuSP Network Quick

Connect Guide

Purpose:

Refer to this guide to modify the Digital Front End (DFE) network

settings at the DFE Local User Interface (UI. For complete

instructions refer to the DocuSP documentation.

Note: A Network Administrator is required to ensure that the DFE is

configured properly. To properly configure the DFE, the Network

Administrator must supply an IP Address, a Subnet Mask, and a

Gateway Address if applicable (as well as a Cat 5 Ethernet drop

cable). For complete instructions to configure the DFE on a Novell

network refer the DocuSP Customer documentation.

Procedure:

This product was designed to connect to most networks with minimal

changes. Connect the DFE to the network. Step 1 provides the

machine default settings. Steps 2 - 5 provide instructions on how to

modify the machine settings and connect clients for printing

Step

1 Default Server and Network

Settings

Port

Default

Settings

Web Services - Enabled

(DHCP).

LPD - Enabled

server name is

Windows Printing - Enabled

Netware – Enabled

IPP - Enabled

AppleTalk – Enabled

Socket - Disabled

Step 2

IP Protocol Setup - using the

Local UI

Note: If you intend to use a Name Service (NIS, NIS+ etc) then

please reference the Customer Documentation. The Name Service

options are not addressed in this quick setup guide.

Auto IP (DHCP): No action required.

Static IP Configuration: Follow this procedure to make changes.

If no changes are required, continue to Step 3.

Local UI

Make sure the DocuSP status displays "printer ready".

Select Logon from the pull-down menu on the DocuSP.

default password is 'administ' and is case sensitive.

Click OK.

Click Setup > Network Configuration.

Select the "Configuration Method" from the IP Address tab.

Enter the Hostname, Default Gateway, IP Address, and

Subnet Mask

Click OK.

Select System > Shutdown.

10. Click Yes.

Default Network Settings

IP Address: Get IP Address

Server Name: The default

"XRX_hostID"

Print Queues:

XRX_hostID_Print

XRX_hostID_Save

XRX_hostID_Hold

11. After the system has completely shutdown, wait 5 seconds

and then press the power button to bring the DocuSP back

up.