Xerox Document Centre 265 ST Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Xerox Document Centre 265 ST. Xerox Document Centre 265 ST 2 pages. Os/2 warp 4.0 (netbeui) peer-to-peer network
Également pour Xerox Document Centre 265 ST : Installation rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel complémentaire (2 pages), Installation rapide (2 pages), Installation rapide (3 pages)

Imprimer la page
Apple Macintosh (AppleTalk) Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
5.
Wait a MINIMUM of 7 minutes for the
printer to reset.
a)
Obtain a Configuration Report page
from your printer.
b)
Review the AppleTalk Settings: area
of the Configuration Report page
and verify that AppleTalk is enabled,
the AppleTalk Name is correct, the
AppleTalk Zone is correct (if used).
c)
From the documentation package
supplied with your printer, retrieve the
CentreWare Network Services CD-
ROM (CD-ROM 2) and the document
entitled Getting Started with Print
and Fax Services. Proceed to the
next section of this procedure called
Go to a Workstation and...
Go to the workstation and...
1.
Use the CentreWare Network Services
CD-ROM (CD-ROM 2) to install print driv-
ers and the Macintosh Naming Utility on
the workstation. Details for this are found
in the document supplied with your printer
entitled Getting Started with Print and
Fax Services.
2.
Send a test job to the printer from an
application program.
3.
Check your test job for quality and use the
problem solving section of the Document
Centre 240/255/265 Reference Guide for
resolving print defects.
4.
If your job did not print see the
Troubleshooting section of the Network
Installation and Troubleshooting Guide.
Page 2