Installation
Software Enablement
Prior to installing the Xerox Smart Card solution, the software requires enabling on your Xerox device
using Internet Services. The Feature Enable Key is printed on the inside cover of the Enablement guide
provided within the Xerox Smart Card kit.
Follow the instructions below to enable the device software:
Xerox WorkCentre 5632/5638/5655/5665/5675/5687, Xerox WorkCentre 5135/5150 and Xerox
WorkCentre 5030/5050:
1.
Access Tools at the device
a.
At the Xerox WorkCentre, press the Access button on the control panel.
b.
Enter the appropriate User ID and Password to access Tools.
Note: The default user name and password are: admin and 1111.
c.
Select Go to Tools.
2.
Enable the Smart Card Software
a.
Select More to access additional Tools options.
b.
Select Optional Services. If necessary, use More to navigate to the option.
c.
Select Smart Card. If necessary, use More to navigate to the option.
d.
When prompted, select the Option Kit Number entry box and enter the unique Feature
Enable Key provided on the inside cover of the Smart Card Enablement Guide.
e.
Select Exit Tools.
Xerox WorkCentre 5735/5740/5755/5765/5775/5790:
1.
Access Tools at the device
a.
At the WorkCentre, press the Machine Status button on the control panel.
b.
Select the Tools tab.
c.
Enter the appropriate User ID and Password to access Tools.
Note: The default user name and password are: admin and 1111.
2.
Enable the Smart Card Software
a.
Select Service Settings.
Select Optional Services.
b.
c.
Select Smart Card.
d.
When prompted, select the entry box and enter the unique Feature Enable Key provided on
the inside cover of the Smart Card Enablement Guide.
e.
Select Enter.
f.
Reboot the device (the device may automatically reboot).
Once the reboot is complete, the Smart Card function is ready to be configured using the Internet
Services interface.
Note:
No services will be restricted until Smart Card has been configured using Internet Services.
12
Xerox® Smart Card
Installation Guide
Imprimer la page