Xerox 3100MFPX - Phaser B/W Laser Manuel d'instructions - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Xerox 3100MFPX - Phaser B/W Laser. Xerox 3100MFPX - Phaser B/W Laser 36 pages. Dect phone installation instructions
Également pour Xerox 3100MFPX - Phaser B/W Laser : Manuel de l'utilisateur (2 pages), Manuel de l'évaluateur (12 pages), Instructions d'installation (2 pages)
Imprimer la page
S
ETTINGS
Programming an emergency
number
This function allows you to define an
emergency number which can be enabled or
disabled.
Once it is activated, the emergency number
will be automatically dialled when the green
key
is pressed from the idle screen.
•
Once activated, you can however call a
different number with pre-dialling by
dialling a number and pressing
The following types of numbers
should not be programmed: Fire,
emergency and police rescue
services...
On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select SECURITY using
Valid.
.
Select EMERGENCY using
Valid.
.
An information screen displays the current
stored emergency number and indicates
whether it is enabled or disabled.
•
To keep the setting, press Valid.
•
To modify the setting, press Edit
A list of various executable actions appears:
- ACTIVATE: to activate the emergency
number.
.
, press
or
or
. Press
or
. Press
.
.
29
- DEACTIVATE: to deactivate the
emergency number.
- CHANGE NO: to modify the emergency
number.
To modify the emergency number, select
CHANGE NO. Press Valid.
Enter the new number using the keypad. You
can pick a number from the phonebook.
Press
, make your selection and
Valid.
,
the active mode is set automatically.
An information screen presents the new
emergency number.
To
activate/deactivate
number, select the corresponding option.
Press Valid.
.
To exit the menu, press the red key
The emergency number is automatically
activated.
The
name
displayed on the idle screen becomes
EMERGENCY.
Modifying the base code
The base code (0000 being the default
setting) is required to access certain security
functions. It must be composed of 4 digits.
On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select SECURITY using
Valid.
.
.
the
emergency
.
of
the
handset
, press
or
or
. Press