Xerox DocuPrint N32 Instructions techniques - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions techniques pour {nom_de_la_catégorie} Xerox DocuPrint N32. Xerox DocuPrint N32 10 pages. Xerox docuprint n24: supplementary guide
Également pour Xerox DocuPrint N32 : Installation rapide (10 pages), Manuel des fonctions (15 pages), Manuel des fournitures (2 pages)
Imprimer la page
Xerox N24/32/40 Technical Instructions
Photo 15
Photo 16
Photo 17
Photo 18
Photo 19
Step 10
Step 10: Dump out the waste toner
from the hopper. Using dry com-
pressed air or a vacuum clean out the
waste hopper.
Step 11
Remove the two screws holding the
wiper blade. (See Photo 15)
NOTE: Do not lose the two spacers that
fit on the two screws. (See Photo 16)
Step 12
Remove the wiper blade from the
waste hopper. (See Photo 17)
Step 13
Apply padding powder to the new
blade. Install the new wiper blade in the
waste hopper making sure the spacers
are on the wiper blade screws.
(See Photo 18)
Step 14
Reinstall the waste hopper cover to
the top of the waste hopper. Install
the screw that holds the cover on the
waste hopper. (See Photo 18)
Step 15
Using a cotton swab and alcohol
clean the PCR contact cradle.
(See Photo 20) Reinstall the
cleaned PCR in the waste hopper.
Photo 20
Step 16
Apply padding powder to the
OPC drum and install the drum.
(See Photo 21)
Photo 21
Need help with a particular remanu-
facturing problem?
Call the Technical Resource Center from
8am - 5pm PST: 800 394.9900
3