Xerox Phaser 8200 Manuel d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Xerox Phaser 8200. Xerox Phaser 8200 11 pages. Phaser color printer
Également pour Xerox Phaser 8200 : Manuel d'installation du module de plateau (2 pages), Manuel d'installation (2 pages), Manuel d'installation (1 pages), Manuel de configuration du réseau (47 pages), Manuel de mise à disposition rapide (1 pages), Installation (1 pages), Manuel (2 pages), Spécifications (4 pages)

Main board and its components

Phaser 840 printer:

Power down the printer. Leave the power cord plugged in to provide a ground path for

static discharges. Remove the interface cables.

Loosen the two rear panel securing screws.

Slide out the main board.

If you are replacing the main board, transfer the socketed realtime clock/NVRAM chip

and the printer ID chip to the new board so that the printer's settings and Ethernet

address are retained. Also swap the SCSI riser board, code ROM DIMM and the

SDRAM DIMMs.

RAM

DIMMS

SCSI

riser

board

Printer

Main

board

Press here

when installing

Fig 7-1 Removing the Phaser 840 printer main board

7 - 180

Phase

Realtime

clock/NVRAM

Code ROM

DIMM

840-4-36