Xerox Phaser 3600 Instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Instruction pour {nom_de_la_catégorie} Xerox Phaser 3600. Xerox Phaser 3600 23 pages. Toner cartridge remanufacturing
Également pour Xerox Phaser 3600 : Caractéristiques (1 pages), Manuel des options (1 pages), Manuel d'installation (2 pages), Lettre de volatilité (1 pages), Manuel d'utilisation rapide (2 pages), Manuel de l'évaluateur (17 pages), Instructions d'installation (2 pages), Instructions d'installation (1 pages), Manuel de mise à jour du micrologiciel (1 pages), Modèle volontaire d'accessibilité des produits (11 pages), Manuel rapide (4 pages)

Imprimer la page
Xerox Phaser 3600 Instruction
XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
7. Using a spring hook remove the two springs from the back
of the toner hopper. One on the left and one on the right side,
about one inch from the back edge.
8. Carefully rock the left side end cap until it becomes free from the cartridge frame. Turn the back edge up so it becomes free
from the hopper. The spring and possibly a small gear will fall from the cartridge. The installation of both parts will be shown later.
www.uninetimaging.com
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]