Xerox PHASER 5400 Instructions techniques - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions techniques pour {nom_de_la_catégorie} Xerox PHASER 5400. Xerox PHASER 5400 5 pages. 1000-sheet stacker
Également pour Xerox PHASER 5400 : Manuel d'installation rapide (40 pages), Manuel (11 pages), Instructions d'installation (2 pages), Manuel papier (2 pages)
Imprimer la page
2
Step 3
Rotate the cartridge to the fill plug
side. Repeat Step 2 to remove the
cartridge pin. Separate the cartridge
sections and put aside the toner
unit. (See Photo 5&6)
Photo 5
Photo 6
Step 4
Remove the screws holding the
metal drum axial and remove drum
axial. Remove screws holding white
plastic drum with contact and
remove white drum axial. (See
Photo 7&8)
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Photo 13
PHASER 5400 Technical Instructions
Step 5
Remove the drum and set aside in a light pro-
tected area.
Step 6
Remove PCR roller from saddle blocks. Set
PCR roller aside. (See Photo 9)
Step 7
Remove the screws to the wiper blade and lift
out wiper blade. Remove waste toner using a
vacuum or dry, compressed air.
(See Photo 10)
Step 8
Clean wiper blade with a soft dry cloth or dry,
compressed air.
Apply padding powder to the blade edge and
reinstall. (See Photo 11&12)
Step 9
Clean PCR saddle blocks with cotton swab
and Anhydrous Isopropyl Alcohol. Clean PCR
using a dry, soft, lint-free cloth.
NOTE: If needed, de-ionized water can be
used to clean the PCR.
(See Photo 13&14)
Photo 14