Xerox 6180DN - Phaser Color Laser Printer Manuel - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 pages. 26-ppm monochrome/ 20-ppm color
Également pour Xerox 6180DN - Phaser Color Laser Printer : Manuel d'installation (34 pages), Fiche technique (2 pages), Manuel de l'utilisateur (32 pages), Manuel de l'utilisateur (28 pages), Manuel d'installation (2 pages), Manuel de sécurité (38 pages), Note de mise à jour (2 pages), Manuel d'installation (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel de démarrage (34 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation et d'utilisation (8 pages), Spécifications (4 pages), Manuel (28 pages)

Edge Enhancement

Edge Enhancement is an iGen3-specific feature that

outlines the non-saturated graphic objects and

produces a crisp edge. In previous releases of

DocuSP, Edge Enhancement was always applied and

could not be turned off. In DocuSP 4.2, the user can

choose to enable or disable this feature.

The Edge Enhancement selection can be set in the

Queue Manager, under Image Quality/Halftone, as

shown in the following image:

Edge Enhancement control in Halftone FAB

Edge Enhancement can also be selected in the Job

Manager and through the use of page exceptions. The

default state of the Edge Enhancement feature is

Enabled.

The ability to disable Edge Enhancement may be

advantageous to a customer who has an image with

blue fill on a single page of a multi-page PDF. If the

outline provided by Edge Enhancement does not

match the fill color, then Edge Enhancement may be

disabled on that specific page, as desired.

DocuSP 3.8 and 4.0 to 4.1 Differences Document