Xerox 850DP - Phaser Color Solid Ink Printer Manuel de l'opérateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Xerox 850DP - Phaser Color Solid Ink Printer. Xerox 850DP - Phaser Color Solid Ink Printer 16 pages. Installation guide for accxes 10.2
Également pour Xerox 850DP - Phaser Color Solid Ink Printer : Spécifications (2 pages), Manuel complémentaire (1 pages), Manuel complémentaire (11 pages), Manuel de configuration (1 pages), Manuel d'instructions de nettoyage (9 pages), Manuel de mise à jour (8 pages), Manuel complémentaire (26 pages), Note de mise à jour (33 pages), Note de mise à jour (11 pages), Note de mise à jour (11 pages), Instructions d'installation (2 pages)

Technical data

The stacker must be moved by authorized personnel only .

In order to ensure that the stacker operates reliably after

moving it to a new location, consider the following guidelines:

The new location must provide minimum clearances around

the stacker. These clearances are shown in the diagram

which is located in the Technical data section of this

manual.

The flooring must be capable of supporting at least 100 lb.

(45.5 kg) for the stacker and an additional 650 lb. (295 kg)

for the attached printer.

The new location must be well ventilated and must maintain

a consistent room temperature. Extreme temperature or

humidity changes can affect the stacker.

Power source receptacles must be properly grounded.

Stacker 1000 Operator Manual

Technical data

inches (3101 mm x 2974 mm)

96 inches (2438 mm) from the floor to the

nearest overhead obstruction, within the floor space

requirements

Once installed, the Stacker 1000 can be moved

in order to access the printer media drawers.

With printer: 122 inches x 117