Xerox Phaser 7750 Manuallines - Page 4

Push Tray 2 completely into the printer.

Selecting Custom Size Options at the Front Panel

At the printer's front panel, do one of the following:

■

Press the OK button if both the paper type and size selected are correct. Go to Step 7.

Change

■

Select

if the paper type or size selected is not correct, then press the OK

button. Go to step 2.

Select the paper type, then press the OK button.

Select Custom, then press the OK button. You are prompted to enter the custom width

and custom height.

Note

When the front panel prompts you to set

(H), verify that you are selecting the correct width and height values for the paper size

and orientation (long-edge feed or short-edge feed). See the following illustration to

determine how to select the correct width and height.

Long-Edge Feed

Custom Width

Select

press the OK button.

Custom Width (W)

7750-168

(W), press the Up or Down Arrow button to select a value, then

Phaser® 7750 Color Laser Printer

2-72

Custom Size Paper

7750-014

Custom Height

and

7750-169

Short-Edge Feed