Xerox Phaser 7750 Manuel du propriétaire - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Xerox Phaser 7750. Xerox Phaser 7750 19 pages. Color laser printer
Également pour Xerox Phaser 7750 : Spécifications (4 pages), Manuel de l'utilisateur (35 pages), Brochure (8 pages), Manuel du propriétaire (4 pages), Spécifications (2 pages), Manuel du réseau (8 pages), Installation rapide (5 pages), Manuel complémentaire (5 pages), Manuallines (5 pages), Manuel complémentaire (2 pages), Manuel complémentaire (16 pages), Manuel d'installation (6 pages), Manuel du propriétaire (3 pages), Manuel d'entretien (1 pages), Manuel des couleurs (4 pages), Manuel d'installation (33 pages), Manuel de référence rapide (8 pages), Manuel d'entretien (14 pages), Manuel de référence rapide (8 pages), Manuel de référence rapide (8 pages), Manuel de configuration (2 pages), User Documentation (17 pages), Manuel de configuration (2 pages), Manuel d'ajout de mémoire (2 pages)

Imprimer la page

Xerox Phaser 7750 Manuel du propriétaire

Using the Stapler

The optional Finisher can staple up to 50 sheets of paper. Once the print job is stapled, it is

delivered to the Finisher Output Tray. The stapler holds 5000 staples.

Note

The printer cannot staple paper fed from Tray 1 (MPT).

■

If output sheets are sent to the stapler unit, but the sheet count exceeds 50, the sheets are

sent to the Finisher Output Tray without being stapled. Further sheets then bypass the

stapler unit, going directly into the Finisher Output Tray.

■

If output sheets are sent to the stapler unit and then the paper type changes during the job

to an unsupported paper type, stapling is turned off and any sheets in the stapler unit are

sent to the Finisher Output Tray. Unsupported paper types then bypass the stapler unit,

going directly into the Top Output Tray.

■

If stapling is on and you are printing multiple copies, check the Collate box, otherwise all

the copies of each page are stapled instead of each set of copies.

■

When the stapler is empty, the front panel notifies you that the staple cartridge is either

empty or missing. Printing continues with pages being delivered to the Finisher Output

Tray without being stapled.

■

If you select stapling in the printer driver, the output is always sent to the Finisher Output

Tray even if you select the Top Output Tray for paper destination.

Stapling Options

Several stapling options are available:

■

None: This is the default option. When selected, prints are not stapled.

■

Front: Inserts one staple in each set of copies. (See the following table.)

■

Rear: Inserts one staple in each set of copies. (See the following table.)

■

Dual: Inserts two staples in each set of copies. (See the following table.)

To select a stapling option in a supported driver:

■

Windows 98, Windows Me, Windows 2000, Windows XP, Windows Server 2003,

Windows NT PostScript driver:

On the Output/Options tab, select an option from the Stapling drop-down list, then select

Finisher Output Tray from the Paper Destination drop-down list.

■

Mac OS 9 driver:

In the Print dialog box, select Finishing Options from the drop-down list, then select one

of the stapling options displayed.

■

Mac OS X (version 10.1 and higher) driver:

In the Print dialog box, select Finishing Options from the drop-down list, then select a

stapling option from the Stapling drop-down list.

Phaser® 7750 Color Laser Printer

2-24

Basic Printing