Xerox Synergix 8850 Manuel du logiciel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du logiciel pour {nom_de_la_catégorie} Xerox Synergix 8850. Xerox Synergix 8850 30 pages. Windows nt 4.0 postscript print driver user guide
Également pour Xerox Synergix 8850 : Manuel de configuration (20 pages), Note de mise à jour (23 pages), Note de mise à jour (8 pages), Manuel de formation des clients (50 pages)

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide

Before You Start

Note: In a network environment, with communication occurring directly

between the individual workstation and the printer, you MUST check your

protocol and printer port. If you are printing through a direct connection

(such as through the serial or parallel port), you can skip this step. If you

are printing through a network server, you should consult your System

Administrator and refer to the Network Administrator's Guide

(admine.pdf) available on the Internet at www.xes.com.

Before installing the PostScript Driver you MUST consider the following:

You will need the TCP/IP protocol enabled at BOTH your workstation

and the printer to facilitate communications.

Check the protocols that are currently enabled at your workstation. Start by

right mouse clicking on "Network Neighborhood" on your desktop, then select

"Properties," and left mouse click on the "Protocols" Tab.

Check the protocols that are currently enabled at the printer by printing a

PRINTER CONFIGURATION Test Print as stated in this Guide.

If you will be changing protocols from an existing working setup, or setting up

a new protocol or port, you may want to refer to the step-by-step setup

instructions provided in the Network Administrator's Guide available on the

Internet at http://www.xes.com. This Guide is in Adobe Acrobat format with

the name of "admine.pdf."

What desktop port will you be using to communicate to the printer?

Make sure that you have a printer port available before starting the driver

installation. Click "Start," "Settings," "Printers," "File," "Server Properties" and

the "Ports" tab to view the list of available ports. Write down an appropriate

port, then click Cancel to escape.

If you do not have a port to use with this driver, it is recommended that you

create a new printer port on your desktop. This process typically begins by

clicking "Start," "Settings," "Printers," "File," "Server Properties," "Ports" tab

and "Add Port." Select the type of port that you would like to create and click

"Add Port."

Notes:

The XES TCP/IP Port works well with this driver. This port is available for

installation with the XES Synergix 8825/8830/8850/8855 HP-GL/2/HP

RTL Print Driver. To obtain a copy of this driver, go to

http://www.xes.com.

You must have Administrator privileges to install or add an XES TCP/IP

Port.