Xerox Wide Format 6050 Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox Wide Format 6050. Xerox Wide Format 6050 22 pages. Wide format twain
Également pour Xerox Wide Format 6050 : Notes de mise à jour (7 pages), Manuel de configuration (20 pages), Note de mise à jour (23 pages), Note de mise à jour (8 pages), Note de mise à jour (8 pages), Note de mise à jour (9 pages), Manuel de formation des clients (50 pages), Manuel de l'utilisateur (36 pages), Manuel de l'utilisateur (48 pages)

Paper size: Select paper size. For this driver, paper size must be selected here,

not at "Paper Size and Orientation" in the "Print/Plot Configuration" dialog

box.

Length: When "Custom size" is selected at "Paper Size", set its length can be

set in integral value in 1mm increments.

Set margin: Set a margin in the range of 0 to 10mm on each side of paper.

This margin reduces the maximum plotting area.

Fill: Set a solid or halftone (dither) pattern for filling graphics or TrueType

fonts.

Select resolution: Select resolution for raster (picture image) output.

Image correction: Click here to open the sub-dialog for raster (picture image)

gamma correction.

Versions...: Version of this driver

Red print: Not supported by this model.

Red-specified pen number: Not supported by this model.

Label: Enter a message to add as a drawing label. Only alphanumeric

characters (ASCII codes) can be used. The maximum number of characters is

64.

Number of Copies: Specify the number of copies (1 to 99).

Select generated data: Select a plotter language (RTL/GL2/VCGL+MMR) to

generate the data. "VCGL+MMR" is not supported by some of the plotter

models.

Options...: Click the "Options..." button to open the dialog box to set optional

functions unique to the selected plotter model.

Click the [Options...] button to open the dialog box. Several functions are not

supported by some plotter models (grayed out options are not supported).

Folder Options

Program: Select Folder Bypass or Programs 1 through 20.

1.3 Driver Operation Reference