Xerox WorkCentre M118 Manuel du logiciel - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel du logiciel pour {nom_de_la_catégorie} Xerox WorkCentre M118. Xerox WorkCentre M118 47 pages. Drum cartridge remanufacturing
Également pour Xerox WorkCentre M118 : Manuel de l'utilisateur (2 pages), Manuel du module (2 pages), Carte d'installation rapide (2 pages), Manuel d'installation rapide (5 pages), Manuel d'installation rapide (5 pages), Manuel (28 pages), Manuel d'installation du support (4 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (2 pages), Manuel d'installation (1 pages), Manuel d'installation (1 pages), Manuel de démarrage (25 pages), Manuel de l'évaluateur (12 pages), Manuel d'entretien (12 pages), Instructions pour le reconditionnement (14 pages)

3 Operation with Windows NT 4.0

Advanced Tab Settings

This section describes the settings of Printer Features in the Advanced tab.

Select the items from Printer Features under Document Options of the Advanced tab

and change the settings in the Change Setting box at the bottom of the tab.

NOTE: The settings that can be selected vary depending on which options have been

installed. Change these settings only after confirming that the option settings are

complete. See Device Settings Tab Settings on page 18.

Offset Stacking - The position of individual jobs or sets of copies are shifted to either

side of the output tray to enable easy separation.

Feed Separators from - Specifies the paper tray that transparency dividers are to be

fed from. When [Auto] is selected, the tray set on the machine is used as the feed

destination.

Print on Separators - Specifies whether or not to print on the transparency dividers as

well as the transparency.

Paper Type (Separators) - Specifies a paper type for the transparency divider.

Bypass Feed Orientation - Specifies the paper orientation when printing from the

bypass tray. When feeding the short edge of the paper first, select [Landscape]. When

feeding the long edge of the paper, select [Portrait].

Xerox WorkCentre 118 Postscript® User Guide