Xerox 6180DN - Phaser Color Laser Printer Manuel de démarrage - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 pages. 26-ppm monochrome/ 20-ppm color
Également pour Xerox 6180DN - Phaser Color Laser Printer : Manuel d'installation (34 pages), Fiche technique (2 pages), Manuel de l'utilisateur (32 pages), Manuel de l'utilisateur (28 pages), Manuel d'installation (2 pages), Manuel de sécurité (38 pages), Note de mise à jour (2 pages), Manuel d'installation (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel (34 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation et d'utilisation (8 pages), Spécifications (4 pages), Manuel (28 pages)

3. DocuSP 4.2 Software Release

Information

The sections in this chapter cover known issues with the

DocuSP 4.2 software and supporting applications.

The following table details the caveats for the DocuSP 4.2

software and indicates which, or all, printer products to which

the caveat applies.

These caveats are planned to be fixed in a future release of

the DocuSP software. If you encounter one of these caveats

that impact your print production, contact your Xerox support

representative.

Caveat

The LCDS Tape Client updates were

incorrectly documented as being available in

earlier versions of the Getting Started and in

the 4.1 to 4.2 Differences Document. The

Tape Client updates are not available in this

release of DocuSP.

For optimal operation of the DocuSP IPDS,

follow these guidelines:

1. Do not Pause the printer to continue

RIPping a job while deferring printing.

Continue the processing and printing of

an IPDS job before attempting to print

another job.

2. Do not use Reposition Output on an IPDS

job.

3. Select 1 to N printing as a default. If N to

1 printing is necessary, set the maximum

set size for the finisher to the actual

finisher capacity, and do not direct jobs to

the finisher that are larger than the

finisher can accommodate.

Specific printer status problems are not

described with Intervention Required

messages. Only a generic message is sent.

Ensure that the print shop management

process does not depend upon the printer

providing a specific description of the error.

Applicable printer product

All applicable LCDS printers

All applicable IPDS printers