Xerox 6180N - Phaser Color Laser Printer Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 28 pages. Color laser printer
Également pour Xerox 6180N - Phaser Color Laser Printer : Manuel d'installation (34 pages), Fiche technique (2 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation (2 pages), Manuel de sécurité (38 pages), Note de mise à jour (2 pages), Manuel d'installation (2 pages), Manuel de démarrage (37 pages), Manuel (34 pages), Manuel (34 pages), Manuel de démarrage (34 pages), Manuel de l'utilisateur (32 pages), Manuel d'installation et d'utilisation (8 pages), Manuel de l'évaluateur (16 pages), Spécifications (4 pages)

Imprimer la page

Xerox 6180N - Phaser Color Laser Printer Manuel de l'utilisateur

Using DocuSP IPDS

Tray/Bin Mapping functions

3-4

When Cancel Incoming Job is selected, a cancel exception is sent to

the host for all processing jobs. The processing stops on all received

pages up to the pages which have been committed. All pages that

have completed processing are considered committed, and print as

usual.

The DocuSP IPS Manager enables you to map the DocuSP physical

trays to IPDS virtual printer trays recognized by the IBM host. The

contents of the virtual IPDS trays are reported to the host.

•

Map IPDS Trays to Stock: Designates which stocks belong in the

virtual trays recognized by the host. The Trays column indicates

each physical tray that calls for the same stock name required by the

virtual tray. The sides imaged selection indicates which sides imaged

selections are supported by the virtual tray.

•

Select Stock for Printer Trays: Allows you to select a stock name for

each of the DocuSP physical trays based on the named stocks in the

DocuSP stock library.

•

Refresh: Select the Refresh button after making changes to the stock

library or assigning stocks to physical trays to allow the stock

information to display properly.

•

View Stock Properties: Allows you to review the properties assigned

to each stock.

•

Map IPDS Bins to Stackers: Designates which of the 5 virtual bins

maps to the DocuSP physical stackers.

•

Host Specified Stacking/Printer Specified Stacking: Maps the virtual

bins requested by the host to the specific physical stackers on the

printer.

•

Printer Specified Stacking: moves all virtual bins to be mapped to

automatic stacking. Automatic stacking directs the system to output

to a suitable stacker. If Unload While Run is supported by the printer,

Automatic Stacking allows you to unload one bin while the printer

continues to deliver sheets to another bin.

Stock mappings can be stored and retrieved as needed as part of job

setup files. Saving and retrieving stock mappings using job setup files

can reduce the time required to set the printing for a job, especially for

complex stock mappings. Follow the procedures in the IPDS on-line help

for saving and retrieving job settings.

Xerox DocuSP IPDS User Guide