Xerox Nuvera 100 Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox Nuvera 100. Xerox Nuvera 100 40 pages. Production system
Également pour Xerox Nuvera 100 : Fiche technique (2 pages), Caractéristiques Manuel (34 pages), Manuel de planification (22 pages), Manuel d'utilisation (34 pages), Manuel de référence (2 pages), Manuel de planification (20 pages), Manuel de référence (42 pages), Référence rapide (2 pages), Manuel d'installation (2 pages), Manuel complémentaire (48 pages), Manuel de planification (38 pages), Manuel de planification (16 pages), Manuel de référence (2 pages), Spécifications (2 pages), Manuel de conseils et d'astuces (18 pages), Manuel de conseils et d'astuces (18 pages), Manuel de démarrage (26 pages), Manuel de démarrage (30 pages)

MICR fonts

Selecting PostScript fonts

2-14

To select a Xerox Postscript font, set the attributes for one

of the following:

Internal name: E13B

Point size: 9.12

Internal name: E13B9

Point size: 9

Internal name: CMC72510

Point size: 9.06

The Postscript E13B MICR font has the same character

mappings as the PCL fixed pitch E13B font. Refer to the

Generic MICR Fundamentals Guide for a complete listing

of the character mappings.

The following HP PCL escape sequences are used to

select the Xerox PCL MICR fonts:

E13B 300 and 600 dpi font:

<ESC>(0U<ESC>(s0p8.00h9.00v0s0b0T

CMC7 600 dpi font (DP 100/115/135/155/180 EPS

only):

<ESC>(1U<ESC>(s0p8h9.1v0s0b0T

Refer to the Generic MICR Fundamentals Guide for a

complete listing of the fixed pitch E13B and CMC7 MICR

font characteristics and character mappings. The

character mappings relate the input character to the

printed character.

If both the 300 and 600 dpi E13B fonts have been loaded

on the printer, the font is selected based on the PCL Unit

that was specified. The default PCL Unit is 300.

You can use the PCL Unit of Measure command to set the

PCL Unit to 600 (for example, <ESC>&u600D).

Alternatively, you can override the resolution to 600 dpi in

the queue. Refer to "Setting the font resolution," later in

this chapter, for information on setting the resolution in the

queue.

MICR User Guide