Xerox Nuvera 100 Manuel de l'utilisateur - Page 38

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Xerox Nuvera 100. Xerox Nuvera 100 40 pages. Production system
Également pour Xerox Nuvera 100 : Fiche technique (2 pages), Caractéristiques Manuel (34 pages), Manuel de planification (22 pages), Manuel d'utilisation (34 pages), Manuel de référence (2 pages), Manuel de planification (20 pages), Manuel de référence (42 pages), Référence rapide (2 pages), Manuel d'installation (2 pages), Manuel complémentaire (48 pages), Manuel de planification (38 pages), Manuel de planification (16 pages), Manuel de référence (2 pages), Spécifications (2 pages), Manuel de conseils et d'astuces (18 pages), Manuel de conseils et d'astuces (18 pages), Manuel de démarrage (26 pages), Manuel de démarrage (30 pages)

Additional information

4-4

3. On the Secure Mode window, select Enable. A

confirmation prompt window opens.

4. Click OK on the confirmation prompt, then on the

Secure Mode window.

When Secure Mode is enabled, a small lock icon is

displayed in the upper-left corner of the printer icon

section of the DocuSP window.

Clearing jobs

To ensure that there are no MICR jobs left on the system,

use the Job Manager to view "Completed Jobs" and

determine if any MICR documents are waiting for an

action in order to be printed. If a MICR document is

waiting to be printed, take the appropriate actions,

depending on the status of the job, to determine the cause

of the problem and correct it.

Ineligible jobs

If a MICR job has Ineligible status, you should follow this

procedure:

1. On the Job Manager window, right-click the ineligible

job, and select Properties... from the pop-up menu.

2. Select the Ineligible tab on the job properties window.

3. In the Ineligible window, check the required resources

to find out which ones are missing.

4. Load any needed resources.

MICR User Guide