Xerox Nuvera 100 Manuel de conseils et d'astuces - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de conseils et d'astuces pour {nom_de_la_catégorie} Xerox Nuvera 100. Xerox Nuvera 100 18 pages. Production system
Également pour Xerox Nuvera 100 : Fiche technique (2 pages), Caractéristiques Manuel (34 pages), Manuel de planification (22 pages), Manuel de l'utilisateur (40 pages), Manuel d'utilisation (34 pages), Manuel de référence (2 pages), Manuel de planification (20 pages), Manuel de référence (42 pages), Référence rapide (2 pages), Manuel d'installation (2 pages), Manuel complémentaire (48 pages), Manuel de planification (38 pages), Manuel de planification (16 pages), Manuel de référence (2 pages), Spécifications (2 pages), Manuel de conseils et d'astuces (18 pages), Manuel de démarrage (26 pages), Manuel de démarrage (30 pages)

Imprimer la page
Xerox Nuvera 100 Manuel de conseils et d'astuces
Xerox Nuvera
Release Issues
CQ#46849 Message stating 'The online configuration file
online.config does not exist' when closing the 'Gateways'
Description
The above error message may occur when closing the "Gateways" window in the Online Setup
tab.
Workaround
If this occurs, select OK in the error message and then close or Cancel in the gateways window.
CQ#47518 When printing files from CD, all pending jobs go to
reject state
Description
When printing files from the CD and the user selects the eject button will cause all pending
jobs to change to reject state.
Workaround
Do not eject the CD while printing files for the CD. If all this was done, all jobs will need to be
resubmitted.
CQ#47650 Printer will boot up slowly when FFRPS is on and the
user has a firewall turned on
Description
When the user has FreeFlow Remote Printing Service turned on and a firewall turned on, the
printer will take longer than usual to restart or power on.
Workaround
Turn off FFRPS or the firewall before starting up or restarting the printer.
CQ#46415 System may stop at SUNOS banner screen during
power on
Description
After powering on the printer, the system may stop at a black screen with the "SUNOS 5.10
Version ..." banner message.
Workaround
Power off and then back on to correct the problem.
Hints and Tips Guide
3-5