Alderon Industries VersAlarm I/O VLIO-0001 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alderon Industries VersAlarm I/O VLIO-0001. Alderon Industries VersAlarm I/O VLIO-0001 20 pages. Indoor/outdoor alarm panel
Également pour Alderon Industries VersAlarm I/O VLIO-0001 : Manuel de démarrage rapide (2 pages)
Imprimer la page
VersAlarm™ I/O | USER GUIDE
Testing the Alarm
Make sure the installation process is completed and there is
power to the product.
STEP 1: TEST ALARM
Press and hold the test/silence pushbutton on the front of the
enclosure. The red LEDs should illuminate (flashing), buzzer
should annunciate, and auxiliary contacts should activate (if
connected; not shown).
SENSOR
AUX
POWER
1 2
3 4 5 6
STEP 2: TEST SENSOR
The sensor should be connected to terminals 1 and 2. Activate
the sensor, the red LEDs should illuminate (flashing), buzzer
should annunciate, and auxiliary contacts should activate (if
connected; not shown).
STEP 3: TEST ALARM SILENCE
Press the test/silence pushbutton on the front of the enclosure
while the sensor is activated. The red LEDs should stop flashing
and remain solid, buzzer should silence, and auxiliary contacts
should remain activated. The silence condition will clear when
the sensor is deactivated and the alarm will auto reset for the
next alarm cycle.
STEP 4: TEST WEEKLY
To ensure the product is functioning properly, test once a week.
Alderon Industries™ - Leading Edge Control Products | 9