eControls Comfort365 C365T11 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} eControls Comfort365 C365T11. eControls Comfort365 C365T11 4 pages.
Également pour eControls Comfort365 C365T11 : Manuel de l'utilisateur (4 pages), Manuel d'installation et d'utilisation (13 pages), Manuel d'installation et d'utilisation (13 pages), Manuel d'installation et d'utilisation (13 pages), Manuel d'installation et d'utilisation (13 pages), Installation (2 pages)

Imprimer la page
eControls Comfort365 C365T11 Manuel de l'utilisateur
Error Messages
No Power Message
nP is displayed when there is
no power to the system. If the
message is displayed when
there is no interruption in
power to the home, contact
your HVAC contractor/builder.
Wiring from the thermostat to
the system needs to be
checked for errors.
Sensor Error Message
nS is displayed when there is
an error with the upstairs
sensor(s). If the message is
displayed, contact your HVAC
contractor/builder. The sensor
wiring needs to be checked
for errors.
When the nS message is
displayed, the thermostat will
continue to control the system but the airflow control will be disabled
until the sensor error is corrected.
Press the touchscreen with your fingertip only, using a
firm touch. Do not use a sharp object such as a pen or
pencil.
Set Time and Day
Touch here to change the
time and day of the week.
AM
NEXT
ENTER
AM
NEXT
ENTER
We
AM
ENTER
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
Day
Tu
AM
MENU
MODE
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
Day
Tu
AM
MENU
MODE
Upstairs
Airflow %
Cool
Set To
Auto
Schedule
Downstairs
Inside
Day
Tu
AM
MENU
MODE
CHANGE THE HOUR
Touch the UP/DOWN keys to change the
HOUR. Touch NEXT to save the hour and
go to change the minute.
CHANGE THE MINUTE
Touch the UP/DOWN keys to change the
MINUTE. Touch NEXT to save the minute
and go to change the day of the week.
CHANGE THE DAY OF THE WEEK
Touch the UP/DOWN keys to change the
DAY OF THE WEEK.
Touch ENTER to save the day of the
week and return to thermostat operation.
Set System Mode
Touch the SYSTEM key to display the SYSTEM MODES - OFF, HEAT,
COOL, or AUTO. When HEAT is selected, the heating setpoint is
displayed. When COOL is selected, the cooling setpoint is displayed. In
AUTO or OFF, the setpoint for the last system call is displayed.
COOL
Upstairs
SYSTEM
Airflow %
AUTO
Auto
Schedule
Downstairs
FAN
Day
Tu
AM
MENU
MODE
Set Fan Mode
COOL
Touch the
FAN
key to display the FAN MODES - AUTO or ON. AUTO is
SYSTEM
the most commonly used setting.
AUTO
FAN
Upstairs
Airflow %
Auto
Schedule
Downstairs
Day
Tu
AM
MENU
MODE
Set Thermostat Mode
Touch the
MODE
key to display the THERMOSTAT MODES -
SCHEDULE, HOLD and VACANT.
Upstairs
Airflow %
Auto
Schedule
Downstairs
Day
COOL
Tu
SYSTEM
AM
AUTO
MENU
MODE
FAN
Displays the Mode.
Changing the Setpoint Temperature
The UP/DOWN keys are used to change the setpoint temperature.
Upstairs
Airflow %
Auto
Schedule
Downstairs
Day
Tu
AM
MENU
MODE
To display the opposing system setpoint, touch the area shown below.
Upstairs
Airflow %
Auto
Schedule
Downstairs
Day
Tu
AM
MENU
MODE
Touch and hold the SYSTEM key
to select:
Heat
OFF
Heating and cooling systems
Set To
are off.
HEAT
Inside
HEAT
Only heating calls are enabled.
SYSTEM
COOL
Only cooling calls are enabled.
AUTO
FAN
AUTO
Heating or Cooling calls are
enabled.
Touch FAN key to select:
Cool
AUTO
Fan is activated only during
Set To
heating or cooling calls.
Inside
COOL
SYSTEM
ON
Fan is continuously on.
AUTO
FAN
Touch and hold the MODE key to select:
SCHEDULE
Cool
Setpoint temperatures are changed
Set To
at scheduled times defined by the user.
Inside
COOL
HOLD
SYSTEM
Setpoint temperatures are set by
AUTO
the user. No schedule is used.
FAN
VACANT
Setpoint temperatures are kept at the
vacant temperatures set by the installer.
Touch the UP key to raise setpoint
temperature.
Cool
Set To
Touch the DOWN key to lower setpoint
Inside
COOL
temperature.
SYSTEM
An active heating call is indicated by
AUTO
HEAT blinking. An active cooling call
FAN
is indicated by COOL blinking.
Touch here to display and change
Heat
the opposing setpoint temperature.
Set To
Touch the UP/DOWN keys to change the
Inside
COOL
setpoint temperature for the opposing
SYSTEM
system. The thermostat will return to
AUTO
displaying the active setpoint after about
FAN
30 seconds.