eControls T200WLD Manuel de l'utilisateur et de l'installateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et de l'installateur pour {nom_de_la_catégorie} eControls T200WLD. eControls T200WLD 8 pages. Direct damper control

Imprimer la page
1

Calibrating the Temperature Sensor

Inside
SYSTEM
NEXT
MENU
MODE
ENTER
1
Displaying Schedule
SYSTEM
Schedule
Day
Mo
AM
CANCEL
NEXT
1

Low Battery Indication

Set To
Inside
SYSTEM
HEAT
Schedule
Day
Mo
AM
NEXT
MENU
MODE
ENTER
Set To
Inside
SYSTEM
HEAT
Schedule
Day
Mo
AM
NEXT
MENU
MODE
ENTER

Installing Batteries

Slide the battery cover off and
install two AA lithium or alkaline
batteries. Install the batteries
with the positive terminals to
the right as shown. Replace
the battery cover.
Press the
MENU
key three times
until the temperature is displayed.
Press the
UP
or
DOWN
key to
adjust the temperature to the
temperature that the user feels is
correct.
Press the
ENTER
key to save
and return to normal operation.
Press and hold the MENU key to
display the schedule.
Press the NEXT key to display
the Day and Night schedule for
each day of the week.
Press the CANCEL key to return
to normal operation.
When battery voltage drops from
3.3V down to 2.5V, the LCD will
alternately display "Lo" in place of
the Inside temperature, and the
LCD backlighting is turned off to
extend battery life. The wireless
communication continues to
operate but the range is reduced.
Batteries should be replaced with
AA alkaline or lithium batteries.
4