Direct Supply ZERO OPENING ASSIST Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Direct Supply ZERO OPENING ASSIST. Direct Supply ZERO OPENING ASSIST 12 pages. Device

Imprimer la page

5. Mount the assist device mounting plate to your bed using the

provided bolts, nuts and washers.

• Correct order of hardware: Bolt ➔ Assist Device ➔ Bed Deck

➔ Flat Washer ➔ Nut

• Using a 19 mm combination wrench or socket wrench and an

8 mm Allen wrench, securely tighten both sets of hardware

•

Only use the included hardware to attach this

WARNING:

assist device to a bed. Do not substitute hardware. Safe

installation requires use of all provided attachment hardware.

Insert the assist handle into

the support tube on the assist

device mounting plate.

Installation

(cont.)

Position the assist at the

desired height setting and

then secure the assist with the

included retention hardware.

To prevent rapid height adjustment or removal of the assist,

use the included nut and bolt to secure the assist handle to

the support tube.

For quick-release adjustment

of handle height and quick

removal of the assist handle,

use the included retention pin.