eControls WRC Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} eControls WRC. eControls WRC 2 pages. Wireless remote control for direct damper control

Imprimer la page

Wireless Remote Control

For Direct Damper Control

Made in USA

Introduction

The WRC can control airflow from 1024 different wireless

dampers installed on ceiling diffusers or registers. Each

damper is programmed from the WRC with a Zone number

from 1 to 32 and an Address from 1 to 32. Typically, a single

WRC would control up to 32 different diffusers or dampers with

the same Address. If more than 32 diffusers need to be

controlled in a single building, work spaces or floors in that

building could be assigned to different Addresses and another

WRC used for that floor or work space.

The actuator/damper can be digitally set to any airflow from

0% (fully closed) to 100% (fully open) using the WRC. The

remote remembers the setting for each zone when the zone is

selected.

Displays the percent

of maximum airflow.

SEL key is used to select the

Zone or Address number

or program the damper Zone

ENT key is used to enter or

save the selected Airflow, Zone or

Address number and send

www.eControlsUSA.com

26945 Cabot Road, Bldg #101 / Laguna Hills, CA 92653 / 949-916-0945 Fax 949-458-8502

and Address.

data to the damper.

Displays the selected zone

or damper number.

ZONE

AIRFLOW

Up and Down keys for setting the

SEL

Airflow level, Zone number or Address.

ENT

User Manual

Model WRC

MEN U

SET

eControls