Yamaha 501 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Yamaha 501. Yamaha 501 20 pages. Internet connection guide (version 1.10)
Également pour Yamaha 501 : Manuel du propriétaire (24 pages), Manuel d'installation (32 pages), Manuel de connexion (22 pages)
Imprimer la page
Wireless LAN Connection Using USB LAN Adaptor
1
Connect the devices according to the example.
First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally
turn the power on again.
NOTE
• For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner's Manual (Chapter 10).
•
Only WEP encryption is available.
Required Devices
•
USB wireless LAN adaptor
For a list of USB wireless LAN adaptors whose compatibility has been confirmed by Yamaha, refer to the
website:
http://music.yamaha.com/download/
* The USB wireless LAN adaptor which is not on the list cannot be used.
•
Access point with router (The router capability here is unnecessary if your modem has router capability.)
•
Modem (ADSL modem, optical network unit or cable modem)
NOTE
• About the confirmation and changes in the setting of the access point with router side, read the owner's manual for the product you are
using.
• Before installing a new router, check that the router performs normally by connecting via a computer.
2
Press the [INTERNET] button.
3
Use the [DATA ENTRY] dial to select "Set the Internet connection," then press the [ENTER]
button to execute.
NEXT PAGE
Set the instrument within 10–20 m from the
access point. The signal will not be received if
there is an obstacle blocking reception.
Wireless
network
USB TO
DEVICE
terminal
USB wireless
LAN adaptor
Modem
Access point
with router
Connection
Internet
6
Internet Connection Guide